KiteJan
My Stuff
Kite Making
Hints & Tips
Misc...
Site
| Item | Qty | Dia. | Len. | Comments |
|---|---|---|---|---|
| Upper Spreader | 1 | 6mm | 53.0cm | Pultruded Carbon |
| Bottom Spreader | 2 | - | 76.0cm | Avia G-Force standard |
| Inner Standoffs | 2 | 3mm | 24.5cm | |
| Outer Standoffs | 2 | 3mm | 32.0cm(*) | |
| Spine | 1 | 6mm | 76.5cm | Skyshark 3P (*) |
| Upper Leading Edge | 2 | - | 78cm | Avia G-Force UL |
| Lower Leading Edge | 2 | - | 83cm | Avia G-Force UL |
(*) I have reason to think these aren't accurate on my kite - use with caution! The original outer standoffs were missing - these measurements were from searching on the internet. Also the spine has been replaced - I believe it should have been G-Force as well.
The Avia G-Force UL spars are tapered - that is go from a diameter of 9mm to 6mm.
© KiteJan 2002-2007