KiteJan

As I don't have a copy of the actual manual I have no idea what to call the various parts of the kite, what the 'official' naming is. Therefore working from photos on the Internet I labelled the various parts, which I refer to in this section.

1. Remove right hand side of the Main Spar CR from the end cap.
   
2. Remove left hand side of the Main Spar CL from the end cap
   
3. Lay entire Main Spar CL to CR above kite sail.
   
4. Remove central section of the Main Spar DL to DR.
   
5. Remove Left Wing Tip Spar AL to BL from the end caps.
   
6. Remove Right Wing Tip Spar AR to BR from the end caps.
   
7. Fold left wing tip sail over EL-FL Spar, with the tip end cap in the centre of the sail.
   
8. Fold right wing tip sail over ER-FR Spar, with the tip end cap in the centre of the sail.
   
9. Place the left hand side Main Spar CL-DL on top of the sail, 5cm along from the Spar EL-FL.
   
10. Place the right hand side Main Spar CR-DR on top of the sail, 5cm along from the Spar ER-FR.
    
11. Fold the sail in half left to right (holding the Main Spar CL-DL).
    
12. Roll the sail tightly from the outside to the inside, inserting the three Spars, AL-BL, AR-BR and DL to DR into the roll near the end.
    
13. Use a Velcro cable tie to keep it all together whilst inserting it into the bag.